Product

Product

Position: Home > Product > Welding station equipment

推荐新闻Recommend

联系我们Contact Us

Shenzhen Haoxin Technology Co., Ltd

电话:0755-29933981

邮箱:market.wu@robothx.com

地址:2/F, Building B, Zhonghengsheng High-tech Park, Xinqiao Street, Bao'an District, Shenzhen, Guangdong Province

Double head broken tin winding machine

  • Product introduction: Product description: This equipment is an automatic tin breaking and winding device. After drilling the solder wire, the solder wire will be automatically rolled up for use. The operation is simple and the tin is broken quickly. The wound tin wire is combined with the lead-free welding table to form a fully automatic tin breaking manual welding table, which can effectively solve the embarrassing situation of the operator holding the soldering iron in one hand while waiting for tin breaking. The broken tin line can be stored for backup without affecting the production cycle. The broken tin wire with the welding table has stable performance, can effectively solve the manual welding of non-standard parts and small parts, and reduce the effective limit of tin explosion. Product Advantages Automatic soldering wire, which contains flux aid, in the soldering process...
  • View:43
  • Time:2024-10-23 13:41:52
  • Detail
  • Parameter
Product Introduction:

This equipment is an automatic tin breaking and winding device. After drilling the solder wire, the solder wire will be automatically rolled up for use. The operation is simple and the tin is broken quickly.

The wound tin wire is combined with the lead-free welding table to form a fully automatic manual soldering table, which can effectively solve the problem of the operator holding the soldering iron in one hand

Awkward situation at work waiting to break tin. The broken tin line can be stored for backup without affecting the production cycle. Broken tin wire with welding table performance

Stable, can effectively solve the non-standard parts and small parts of manual welding, effective limit to reduce the problem of tin explosion.

Product advantage

Automatic soldering wire, which contains flux aid, in the soldering process when the flux in the wire instantaneously encounter the high temperature of the iron head will be in

Boiling in molten metal, the high pressure caused by this boiling reaction often causes a phenomenon known as "tin explosion", boiling flux with tin explosion

After opening, it cools down instantly, and finally forms small tin balls on the substrate. The spattered tin ball particles after the tin explosion are easy to operate the eyes and skin of employees

Cause harm. At the same time, if the tin ball is not cleaned, it is easy to cause short circuit on the substrate, which seriously affects the welding quality. And automatic soldering if you want

Loading the visual inspection system, the cost is not only too high but also lengthens the entire process time.

In order to avoid tin explosion in the soldering process, our company has developed an automatic tin breaking and winding machine, which uses precision machined knife gear on the side of the tin wire

Press out small holes to allow the flux to seep out, allowing most of the flux to boil around the metal. Greatly avoid the production of flux boiling during soldering process

"Tin Pop." Avoid the operator's eyes and skin will not be harmed by the small tin ball particles produced by the "tin burst", and will not help

The solder or tin ball produced by the solder explosion affects other sensitive components on the PCB board, effectively ensuring the cleaning of the welding site.

WeiXin

Copyright © Shenzhen Haoxin Technology Co., Ltd  All rights reserved ICP:Guangdong ICP number 14097895   Mainly engaged inVisual soldering machine, computer version screw machine, automatic dispensing machine, Welcome to inquire!                            

onLine