Talk about the industry for which your automatic soldering machine is applicable

Automatic welding machine equipped with a large transparent window, you can observe the entire welding process, product development, process curve optimization has a very important role, computer version screw machine efficiency is very high, non-manual can be compared, temperature control using high-precision intuitive intelligent controller, programmable curve control, accurate temperature control, simple parameter setting, easy to operate, The visual soldering system is the core element of the visual soldering machine, and the welding machine can only rely on natural cooling or pulling out the PCB board to cool the external welding machine, so that the reflow process curve is more curved, to avoid damage to the surface mount device and welding displacement.

Solder manufacturers talk about the industry applicable to automatic welding machines.

1. Communication industry: Apple product data cable, HDMI, RJ45, FPC, high frequency priority, etc.

2, photoelectric technology industry: led display, led lamp strip, led rectifier, led ball lamp, led lamp bead, etc.

3, home appliance industry: air conditioning use remote control, air conditioning system control board, washing machine control board, smart lock, computer control speaker, etc

4. Automotive industry: ignition switch, oil pressure sensor, ABS controller, navigation device, etc.

5, toy enterprise industry: toy game controller connector, intelligent development of toy pcb circuit board.

Welding process precautions, the solder joint should not be supersaturated, should be in the middle of three or four points, otherwise the solder joint is too large, easy to break adjacent to the solder joint, tin and component foot into a small semi-circle, so that the welded circuit board neat, is also good. The lead of the soldering machine should not be too thin and too long, the welding voltage drop should not be greater than 5% of the initial voltage, and gloves and protective glasses should be worn during operation.

Do not put the tip on the sponge during use, just put the tin in the tip into the tin box, so that the temperature of the tip will not drop rapidly. After using the soldering machine every day, clean it first, add enough tin, and then cut off the power immediately, which helps to increase the service life of the machine.