Product Introduction:
This equipment is an automatic tin breaking and winding device. After drilling the solder wire, the solder wire will be automatically rolled up for use. The operation is simple and the tin is broken quickly.
The wound tin wire is combined with the lead-free welding table to form a fully automatic manual soldering table, which can effectively solve the problem of the operator holding the soldering iron in one hand
Awkward situation at work waiting to break tin. The broken tin line can be stored for backup without affecting the production cycle. Broken tin wire with welding table performance
Stable, can effectively solve the non-standard parts and small parts of manual welding, effective limit to reduce the problem of tin explosion.
Product advantage
Automatic soldering wire, which contains flux aid, in the soldering process when the flux in the wire instantaneously encounter the high temperature of the iron head will be in
Boiling in molten metal, the high pressure caused by this boiling reaction often causes a phenomenon known as "tin explosion", boiling flux with tin explosion
After opening, it cools down instantly, and finally forms small tin balls on the substrate. The spattered tin ball particles after the tin explosion are easy to operate the eyes and skin of employees
Cause harm. At the same time, if the tin ball is not cleaned, it is easy to cause short circuit on the substrate, which seriously affects the welding quality. And automatic soldering if you want
Loading the visual inspection system, the cost is not only too high but also lengthens the entire process time.
In order to avoid tin explosion in the soldering process, our company has developed an automatic tin breaking and winding machine, which uses precision machined knife gear on the side of the tin wire
Press out small holes to allow the flux to seep out, allowing most of the flux to boil around the metal. Greatly avoid the production of flux boiling during soldering process
"Tin Pop." Avoid the operator's eyes and skin will not be harmed by the small tin ball particles produced by the "tin burst", and will not help
The solder or tin ball produced by the solder explosion affects other sensitive components on the PCB board, effectively ensuring the cleaning of the welding site.
