The core of automatic assembly: the use of computer version screw machine skills

The computer version of the screw machine is one of the core equipment of automatic assembly, and its main use is to automatically fix the screw on the product. This article will introduce how to correctly use the computer version of the screw machine.


1. Preliminary preparation


Select the right screw: Select according to your needs, including screw specifications and models.


Set parameters according to the needs of the product: Set appropriate screw speed, torque, depth and other parameters according to the needs of the product.


Installing and verifying: Install the screwdriver head and ensure that it is in the correct position.


2. Operation process


Turn on the power: press the switch to turn on the power, and enter the standby state after the machine is started.


Load program: Upload the required screw program to the computer version of the screw machine.

Place the product: Place the product to be assembled on the machine workbench, and adjust the position and Angle.


Start the machine: press the start button, the machine starts to work, and automatically completes the task of screw fixing according to the preset program.


Check completion: When the machine automatically completes the screw fixing task, you can check whether the quality and quantity of fixing meet the requirements.


Turn off the machine: After completing the operation, press the close button to turn off the computer version screw.


Three, the use of skills


Pay attention to safety: When using the computer version of the screw, pay attention to safety, avoid fingers or other items into the machine working area.


Avoid excessive speed: Screw fixed speed can not be too fast, otherwise it may damage the product or affect the fixed quality.


Create a library: you can save commonly used screw programs in the machine for next use.


Regular maintenance: Regular cleaning and maintenance of the computer version of the screw machine to ensure its normal work and extend the service life.


Reasonable planning of production plan: the working efficiency of the computer version of the screw machine is higher, so you can reasonably plan the production plan according to the need to improve production efficiency.


In short, the computer version of the screw machine is one of the important equipment for automatic assembly, and it is relatively simple to use. However, in the specific operation process, it is also necessary to pay attention to some skills and precautions to ensure the normal work of the machine and the quality of the product.