Automatic soldering machine check the importance of position changes!

Automatic soldering machine check the importance of position changes!

The first step is to check all the power supplies. That's the first thing we do, because a lot of times that's where it fails. Short circuit of non-standard automatic welding machine often leads to interruption of production. So we have to deal with that in the first step. Not because of some other content, but because our own welding may be interrupted due to some power issues. This gas source is also for the same reason that it cannot be produced at a critical time.

Secondly, check whether the position of the non-standard automatic welding machine has changed. This detail is also important. Sometimes due to the negligence of the operator, the position is shifted, resulting in sensor failure, resulting in many production stops. After long-term production, there will be some loosening phenomenon, which needs regular treatment by maintenance personnel.

Let's take a look at some flow control valves and pressure control valve automation equipment. These devices, like sensors, are critical to maintenance.

Expanded knowledge: Standard automatic winding machine six functional components:

1. Use the touch screen to set parameters, monitoring screen and alarm tips;

2. When the emergency stop switch, press the emergency stop button to stop the operation of the device;

3. Power switch The power selection switch on the electrical control box can power on or power off the equipment;

4, start button Put the line into the slot, press the start button, the machine starts to work;

5. The knotted test button is in standby state. The button can test the stability of the wire drawing mechanism and the wire feeding mechanism, and it is convenient to adjust;

6. If the reset button is abnormal, restart the device or the winding motor and line manipulator are not in the initial position, press the button to return to the initial state.

Characteristics of soldering machine control system

1, welding process: gas welding method, workpiece deformation, welding gun swing multi-layer welding.

2, unique calming function, welding at any time.

3, welding position requirements: horizontal position clamping and grip.

4. Special machine layout: The welding machine uses carbon steel welding, firm and firm. The main idea of the procurement method is to install a pneumatic tailframe at both ends of the device, the nose is firm, and the recoil movement is coordinated.

5. Main head: working reverse rotation is the drive mode tightened by the three clamping claws of the inverter and the motor reducer, stable activity and stepless speed regulation. All back seats have guided Tours.

6. Oza: Atmospheric pressure is used at the top.

7. Torch movement theme: Torch pneumatic takeoff and landing can set the automatic takeoff and landing interval between the first layer of electromechanical swing welding. The torch layout size is adjustable and can be set according to the needs of the bowl.

8. Support mechanism: After process adjustment, if the roller opening causes the working diameter to be different, the center is still the same as the reverse extension center.

9. Protective door and protective box: movable sliding door installed on the back, equipped with welding protective glass, observe the welding environment, prevent arc radiation and welding scattering to the human body, and integrate with the protective door. The device has a beautiful name.

10, pressure clamping system: tension calculation system in line with the relevant national standards.

11. Electrical clamping system: Programmable fixture (PLC) is the main control unit, the input point is maintained by the central relay, the Chinese touch screen is adjusted as parameters, and the dialogue screen is displayed. Touch screen can set welding voltage and current for each layer. The welding speed and swing speed of each layer can be set. With torch automatic promotion, manual, active and other functions.

12, achieve full digital adjustment of welding standard position on the clamping platform, the setting is completed, the welding speed is stepless adjustment, digital display, and the number of rings before welding;

13, 0 Install electrical control panel and handle box, and use standard cable trough chain to run cables, gas pipes, etc.

14, maintenance assembly: When the equipment has sufficient conditions, the equipment automatically maintains its active state, waiting for the standard to be restored.