Automatic screw machine saves not only cost for the factory! Can also solve the problem of less labor, for the hand screw machine I believe that the vast majority of enterprises are commonly used, why do you say so? Whether it is a few years ago or now the production line of the enterprise is used, the use of traditional hand screw machine is completed by manual, including taking screws, playing screws this action must be manually achieved, but in recent years, there has been progress in the development of industry, automatic screw machine on the market, in the automatic screw machine heard to save manufacturing costs for enterprises, is this true? Here I can professionally answer you, this is an absolute cost saving equipment for the enterprise, not only for the enterprise to save costs, but also to enhance the manufacturing capacity of the enterprise, automatic dispensing machine is widely used in semiconductor, electronic parts, LCD manufacturing and other fields, automatic screw machine by what screw?
Blowing method: The screw is blown through the compressed air to the nozzle below, and the electronic batch automatically locks the product. The blowing method is generally applicable to the M5 screw, the length is less than 25, and the total length of the screw l should be greater than 1.3 times the diameter of the screw head D, otherwise, the flipping phenomenon will be caused in the feeding tube, so that it can not be sent normally, and the material separation efficiency can reach 1s/PCS. Computer version screw machine efficiency is very high, non-manual can be compared,
2. Adsorption type: The screw is the adsorption force generated by the compressed air of the electric batch head, remove a single screw, and then run to the product hole position, the electric batch down automatically locked into the product, the separation efficiency is related to the walking distance, running speed, generally 1.5-4S/Pcs adsorption type is generally suitable for relatively small length, light weight, blowing type can not achieve the screw, At the same time, the upper surface of the screw head can form a certain air tightness with the vacuum suction head cavity of the electric batch.
What are the development characteristics of the adsorption automatic screw machine? The vacuum absorbent automatic screw machine system consists of a vacuum absorbent lock screwdriver system and a torsion support arm or screwdriver bracket structure. Use the information vacuum signal generator to generate negative pressure directly by acting on the screw head at the vertical suction screws. Using the electric screwdriver used by mature enterprises and installing a vacuum physical adsorption screwdriver system, it greatly improves the cost of saving resources and easily upgrades from an ordinary screwdriver to a multifunctional high-end screwdriver.
In traditional manual screwdrivers, the line worker has an electric batch screwdriver and sets up a workbench one by one. In the operation of the electronic batch, he still relies on manual to take screws, and then to manufacture screws, each workstation can not go to too many screws, if you play too much, then there will be a push, so there will be a lot of product scratches and other adverse phenomena, because the product defect rate greatly increased, which will only lead to higher production costs of enterprises. This is the enterprise does not want to see the result, manual operation of the screw will not only affect the output, but also affect the quality, one is no quality, the second is no speed, this is not the reason for the high cost of the enterprise?
